Send Email
Send SMS
Search
Euro Woods & Timbers Private Limited (Unit Of Straton Group)
Euro Woods & Timbers Private Limited (Unit Of Straton Group)


PVC Integral Foam Boards - PVC Sheet

Our latest innovative introduction in the market replacing traditional plywood/boards: PVC integral foam sheet are chemically foamed, extruded rigid, light weight sheet with fine & homogeneous closed cell structure & smooth, hard surface finish on both sides. PVCdoes not corrode and are highly resistant to rot, decay, and Marine Borer attack and are often considered a sustainable material because they can be made using recycled plastics and the waste products of the wood.

Composed of PVC (poly-vinyl Chloride)Resins, Calcium Carbonate & Additives (70:25:5).

PVC and CaCo3 have the same bulk density and CaCo3 acts as the perfect filler when the foaming process of the PVC granules takes place thereby maintaining the precise density of the sheets thus extruded. It is this very property which makes it the perfect replacement for Plywood in terms of the strength, flexural and tensile properties.


PVC Boards

REQUEST CALLBACK

PVC Boards
Approx. Rs 120 / Square Feet
Get Best Quote

Our PVC Boards possesses such physical properties that provide designers with an array of options while designing new products and developing solutions as it also acts as a replacement or refurbishment material. It is an upward trend for PVC foam board suppliers in India as the customers using plywood boards are now switching preference. On the contrary, PVC boards are lighter, less operative-expensive and offer many performance advantages. PVC panels are easy to install, water-proof, maintenance-free and are available in various textures, patter and design.


Features:


  • Excellent finishing
  • Optimum strength
  • Good impact resistance

Specifications:


  • straton
  • Width: 4
  • Length: 8
  • Thickness: 8, 10, 12, 15, 18, 24 & 30
  • Other Specs: Variant colors - Red, Blue, Orange, Yellow, White and dark brown


Additional Information:

  • Minimum Order Quantity: 160 Square Feet
Yes! I am interested

Watch Video

PVC Plastic Boards

REQUEST CALLBACK

PVC Plastic Boards
Approx. Rs 63 / Square Feet
Get Best Quote

Our PVC Boards possesses such physical properties that provide designers with an array of options while designing new products and developing solutions as it also acts as a replacement or refurbishment material. It is an upward trend for PVC foam board suppliers in India as the customers using plywood boards are now switching preference.


Additional Information:

  • Minimum Order Quantity: 160 Square Feet
Yes! I am interested

Watch Video

PVC Wall Cladding

REQUEST CALLBACK

PVC Wall Cladding
Approx. Rs 161 / Square Feet
Get Best Quote

PVC sheets are easy to paint with rigid PVC compatible paints. These can be Vinyl, Acrylic lacquers, or two part Polyurethane based paints. Sheets must be dry, clean and oil/grease free. Cloth soaked in Isopropyl alcohol is recommended for surface cleaning. Screen printing should be allowed to air dry instead of heat drying. Temperatures in excess of 149° F may cause sheet warping or blowing.Contact adhesive with solvent can be used. Follow same directions for application as for non-porous bonding. Pressure sensitive tape can be used for stress free and less demanding applications.


Additional Information:

  • Minimum Order Quantity: 160 Square Feet
Yes! I am interested

View PDFWatch Video

PVC Green Panelling

REQUEST CALLBACK

PVC Green Panelling
Approx. Rs 244 / Square Feet
Get Best Quote

VC sheets can be easily machined using ordinary tools used for processing metal or wood. However, the following precautions need to be taken. Avoid sharp edges and deep notches which can cause stresses leading to early breakage to the plastic sheets. Cooling is not necessary under normal conditions if the cutting edges are kept sharp and the processing heat is dissipated by quickly removing the shavings. However, compressed air, water or cooling liquid is suitable if used in accordance with the existing safety instructions. To obtain smooth or glossy surfaces on the PVC boards, finishing with felt buffing wheels or tapes is recommended.


Additional Information:

  • Minimum Order Quantity: 160 Square Feet
Yes! I am interested

View PDFWatch Video

PVC Wardrobes & Kitchen Cabinet

REQUEST CALLBACK

PVC Wardrobes & Kitchen Cabinet
Approx. Rs 161 / Square Feet
Get Best Quote

Our Latest innovative introduction in the market supplanting traditional plywoods/boards in their uses and much beyond: Straton PVC Integral foam boards are chemically foamed, extruded rigid, light weight sheets with fine and homogenous closed cell structure and smooth finishes on both sides.



Additional Information:

  • Minimum Order Quantity: 160 Square Feet
Yes! I am interested

View PDFWatch Video

PVC Counter Top & Table

REQUEST CALLBACK

PVC Counter Top & Table
Approx. Rs 244 / Square Feet
Get Best Quote
Product Details:
Minimum Order Quantity160 Square Feet
ShapePlain
Size8' X 4'
ColorWhite

PVC sheets can be easily machined using ordinary tools used for processing metal or wood. However, the following precautions need to be taken. Avoid sharp edges and deep notches which can cause stresses leading to early breakage to the plastic sheets. Cooling is not necessary under normal conditions if the cutting edges are kept sharp and the processing heat is dissipated by quickly removing the shavings. However, compressed air, water or cooling liquid is suitable if used in accordance with the existing safety instructions. To obtain smooth or glossy surfaces on the PVC boards, finishing with felt buffing wheels or tapes is recommended.
Yes! I am interested

View PDFWatch Video

PVC Partition Systems

REQUEST CALLBACK

PVC Partition Systems
Approx. Rs 161 / Square Feet
Get Best Quote

Our PVC Boards possesses such physical properties that provide designers with an array of options while designing new products and developing solutions as it also acts as a replacement or refurbishment material. It is an upward trend for PVC foam board suppliers in India as the customers using plywood boards are now switching preference. On the contrary, PVC boards are lighter, less operative-expensive and offer many performance advantages. PVC panels are easy to install, water-proof, maintenance-free and are available in various textures, patter and design.


Additional Information:

  • Minimum Order Quantity: 160 Square Feet
Yes! I am interested

View PDFWatch Video

PVC Cabinets

REQUEST CALLBACK

PVC Cabinets
Approx. Rs 244 / Square Feet
Get Best Quote

Composed of PVC (poly-vinyl Chloride)Resins, Calcium Carbonate & Additives (70:25:5).

PVC and CaCo3 have the same bulk density and CaCo3 acts as the perfect filler when the foaming process of the PVC granules takes place thereby maintaining the precise density of the sheets thus extruded. It is this very property which makes it the perfect replacement for Plywood in terms of the strength, flexural and tensile properties.



Additional Information:

  • Minimum Order Quantity: 160 Square Feet
Yes! I am interested

View PDFWatch Video

PVC Door Shutters

REQUEST CALLBACK

PVC Door Shutters
Approx. Rs 244 / Square Feet
Get Best Quote

PVC sheets can be drilled with conventional, high helix, high speed steel carbide tipped metal bits. Cutting edges must be kept sharp to prevent poor surface finish and undersized holes. Cutting and feeding speed depends on depth of bores, the thicker the sheet the lower the speed. Stationary or hand routers can be used for slotting, beveling, rabbeting, rounding edges and trimming to the PVC boards. Best cutting results are obtained with carbide tipped router bits.PVC sheets can be easily cut by shearing up to 3mm thickness. In case any deformity, rougher cut surface or fracturing is noticed, it is primarily because of sheet temperature. PVC sheet, a thermoplastic material, tends to acquire brittleness at lower temperatures. Therefore, pre-heat the sheet material to 95° – 131° F, before shearing. Die cutting by “Steel rule dies” is a common practice. Ideally it is 25mm wide strip steel, thickness 0.35–1mm, with one edge pre-shaped as knife. Bevel may be used depending on cut requirements with one side or both side honing. The bevel should be 5 or 6mm in length.


Additional Information:

  • Minimum Order Quantity: 160 Square Feet
Yes! I am interested

View PDFWatch Video

PVC Work Stations

REQUEST CALLBACK

PVC Work Stations
Ask for Price
Product Details:
Minimum Order Quantity160 Square Feet
Size8' X 4'
ColorWhite
Design TypeStandard
BrandStraton

PVC Sheet can be bonded both to itself and other materials. Adhesive types must be chosen according to bonding requirements.

  • Edge bonding and joining parts of sheet materials: PVC solvents such as Tetrahydrofuran, Methyl Ethyl Ketone or Cyclohexanone can be used. Solvents must be fresh and effective.
  • Bonding to nonporous materials such as other plastics/metals: Polyurethane or other synthetic rubber based adhesives are recommended. Solvent-free two part. Polyurethane adhesive can also be used. Adhesives must be applied to both faces; quantity approximately 150g/m_. A parallel bead of adhesive is often preferred because it offers evaporation of solvent providing faster cure.
  • Bonding with flexible PVC sheets: Only plasticizer-resistant type adhesives should be used. Bonding porous material such as, papers, Textiles, Fabrics or
  • Wood: Contact adhesive with solvent can be used. Follow same directions for application as for non-porous bonding. Pressure sensitive tape can be used for stress free and less demanding applications.
Yes! I am interested

Watch Video

PVC Plywood

REQUEST CALLBACK

PVC Plywood
Approx. Rs 161 / Square Feet
Get Best Quote

Our Latest innovative introduction in the market supplanting traditional plywoods/boards in their uses and much beyond: Straton Integral foam PVC boards are chemically foamed, extruded rigid, light weight sheets with fine and homogenous closed cell structure and smooth finishes on both sides.



Additional Information:

  • Minimum Order Quantity: 160 Square Feet
Yes! I am interested

View PDFWatch Video

Recycled Building Materials - PVC Integral Foam Boards

REQUEST CALLBACK

Recycled Building Materials - PVC Integral Foam Boards
Approx. Rs 150 / Square Feet
Get Best Quote
Product Details:
Minimum Order Quantity160 Square Feet
Size8' X 4'
Thickness15mm
BrandStraton

PVC sheets are easy to paint with rigid PVC compatible paints. These can be Vinyl, Acrylic lacquers, or two part Polyurethane based paints. Sheets must be dry, clean and oil/grease free. Cloth soaked in Isopropyl alcohol is recommended for surface cleaning.
Yes! I am interested

Watch Video

Window Frames & Doors

REQUEST CALLBACK

Window Frames & Doors
Approx. Rs 244 / Square Feet
Get Best Quote

Our Latest innovative introduction in the market supplanting traditional plywoods/boards in their uses and much beyond: Straton Integral foam PVC boards are chemically foamed, extruded rigid, light weight sheets with fine and homogenous closed cell structure and smooth finishes on both sides.

Composed of PVC (poly-vinyl Chloride)Resins, Calcium Carbonate & Additives (70:25:5).

PVC and CaCo3 have the same bulk density and CaCo3 acts as the perfect filler when the foaming process of the PVC granules takes place thereby maintaining the precise density of the sheets thus extruded. It is this very property which makes it the perfect replacement for Plywood in terms of the strength, flexural and tensile properties.



Additional Information:

  • Minimum Order Quantity: 160 Square Feet
Yes! I am interested

View PDFWatch Video

PVC Plyboard

REQUEST CALLBACK

PVC Plyboard
Approx. Rs 161 / Square Feet
Get Best Quote
Product Details:
Minimum Order Quantity160 Square Feet
BrandStraton
Length8 feet
Width4 feet
Thickness18mm
ColorWhite

Our latest innovative introduction in the market replacing traditional plywoods/boards: Straton PVC Integral Free Foam Sheet are chemically foamed, extruded rigid, light weight sheet with fine homogeneous closed cell structure smooth, hard surface finish on both sides.
Yes! I am interested

Watch Video

PVC Celuka Boards

REQUEST CALLBACK

PVC Celuka Boards
Approx. Rs 150 / Square Feet
Get Best Quote
Product Details:
Minimum Order Quantity160 Square Feet
BrandStraton
ColorWhite
Size8' X 4'

PVC celuka boards can be easily machined using ordinary tools used for processing metal or wood. However, the following precautions need to be taken. Avoid sharp edges and deep notches which can cause stresses leading to early breakage to the plastic sheets. Cooling is not necessary under normal conditions if the cutting edges are kept sharp and the processing heat is dissipated by quickly removing the shavings. However, compressed air, water or cooling liquid is suitable if used in accordance with the existing safety instructions. To obtain smooth or glossy surfaces on the PVC boards, finishing with felt buffing wheels or tapes is recommended.

  • Cutting/Sawing – PVC sheets up to 3mm thickness can be cut with a knife or blade. Thicker PVC sheets can be cut with hand saw or circular saw. High saw speeds up to 3000 RPM with tooth pitch of 5 to 10mm are used depending on sheet thickness. For circular saws, it is commonly recommended to use tooth geometry alternating between flat tooth, trapezoidal tooth and rigid metal. Always fasten the sheet and avoid vibrations during cutting to achieve clean cutting edges.
  • Drilling – PVC sheets can be drilled with conventional, high helix, high speed steel carbide tipped metal bits. Cutting edges must be kept sharp to prevent poor surface finish and undersized holes. Cutting and feeding speed depends on depth of bores, the thicker the sheet the lower the speed.
  • Routing – Stationary or hand routers can be used for slotting, beveling, rabbeting, rounding edges and trimming to the PVC boards. Best cutting results are obtained with carbide tipped router bits.
  • Milling – PVC sheets can be milled with milling tool that has allowance to accommodate smoother removal of chips. High forward feed along with moderate cutting speed and deep cuts will lead to good results.
  • Turning – PVC sheets can be worked by turning with a point of turning tool rounded to 0.50 mm radius to avoid linear marks on cutting surfaces. During precision turning, lower cut (2mm) and faster feeding should be used to prevent sheet breakage.
  • Cutting Punching – PVC sheets can be easily cut by shearing up to 3mm thickness. In case any deformity, rougher cut surface or fracturing is noticed, it is primarily because of sheet temperature. PVC sheet, a thermoplastic material, tends to acquire brittleness at lower temperatures. Therefore, pre-heat the sheet material to 95° – 131° F, before shearing. Die cutting by “Steel rule dies” is a common practice. Ideally it is 25mm wide strip steel, thickness 0.35–1mm, with one edge pre-shaped as knife. Bevel may be used depending on cut requirements with one side or both side honing. The bevel should be 5 or 6mm in length.
Yes! I am interested

Watch Video

PVC Celuka Foam Boards

REQUEST CALLBACK

PVC Celuka Foam Boards
Approx. Rs 161 / Square Feet
Get Best Quote

PVC celuka Foam Boards can be easily machined using ordinary tools used for processing metal or wood. However, the following precautions need to be taken. Avoid sharp edges and deep notches which can cause stresses leading to early breakage to the plastic sheets. Cooling is not necessary under normal conditions if the cutting edges are kept sharp and the processing heat is dissipated by quickly removing the shavings. However, compressed air, water or cooling liquid is suitable if used in accordance with the existing safety instructions. To obtain smooth or glossy surfaces on the PVC boards, finishing with felt buffing wheels or tapes is recommended.

  • Cutting/Sawing – PVC sheets up to 3mm thickness can be cut with a knife or blade. Thicker PVC sheets can be cut with hand saw or circular saw. High saw speeds up to 3000 RPM with tooth pitch of 5 to 10mm are used depending on sheet thickness. For circular saws, it is commonly recommended to use tooth geometry alternating between flat tooth, trapezoidal tooth and rigid metal. Always fasten the sheet and avoid vibrations during cutting to achieve clean cutting edges.
  • Drilling – PVC sheets can be drilled with conventional, high helix, high speed steel carbide tipped metal bits. Cutting edges must be kept sharp to prevent poor surface finish and undersized holes. Cutting and feeding speed depends on depth of bores, the thicker the sheet the lower the speed.
  • Routing – Stationary or hand routers can be used for slotting, beveling, rabbeting, rounding edges and trimming to the PVC boards. Best cutting results are obtained with carbide tipped router bits.
  • Milling – PVC sheets can be milled with milling tool that has allowance to accommodate smoother removal of chips. High forward feed along with moderate cutting speed and deep cuts will lead to good results.
  • Turning – PVC sheets can be worked by turning with a point of turning tool rounded to 0.50 mm radius to avoid linear marks on cutting surfaces. During precision turning, lower cut (2mm) and faster feeding should be used to prevent sheet breakage.
  • Cutting Punching – PVC sheets can be easily cut by shearing up to 3mm thickness. In case any deformity, rougher cut surface or fracturing is noticed, it is primarily because of sheet temperature. PVC sheet, a thermoplastic material, tends to acquire brittleness at lower temperatures. Therefore, pre-heat the sheet material to 95° – 131° F, before shearing. Die cutting by “Steel rule dies” is a common practice. Ideally it is 25mm wide strip steel, thickness 0.35–1mm, with one edge pre-shaped as knife. Bevel may be used depending on cut requirements with one side or both side honing. The bevel should be 5 or 6mm in length.


Additional Information:

  • Minimum Order Quantity: 160 Square Feet
Yes! I am interested

Watch Video

PVC Celuka Sheets

REQUEST CALLBACK

PVC Celuka Sheets
Approx. Rs 81 / Square Feet
Get Best Quote
Product Details:
Minimum Order Quantity160 Square Feet
Size(FeetXFeet)8' X 4'
Thickness(mm)6
ColorWhite
FeaturesFire Retardant, Moisture Resistant, Water proof

PVC celuka sheets can be easily machined using ordinary tools used for processing metal or wood. However, the following precautions need to be taken. Avoid sharp edges and deep notches which can cause stresses leading to early breakage to the plastic sheets. Cooling is not necessary under normal conditions if the cutting edges are kept sharp and the processing heat is dissipated by quickly removing the shavings. However, compressed air, water or cooling liquid is suitable if used in accordance with the existing safety instructions. To obtain smooth or glossy surfaces on the PVC boards, finishing with felt buffing wheels or tapes is recommended.

  • Cutting/Sawing – PVC sheets up to 3mm thickness can be cut with a knife or blade. Thicker PVC sheets can be cut with hand saw or circular saw. High saw speeds up to 3000 RPM with tooth pitch of 5 to 10mm are used depending on sheet thickness. For circular saws, it is commonly recommended to use tooth geometry alternating between flat tooth, trapezoidal tooth and rigid metal. Always fasten the sheet and avoid vibrations during cutting to achieve clean cutting edges.
  • Drilling – PVC sheets can be drilled with conventional, high helix, high speed steel carbide tipped metal bits. Cutting edges must be kept sharp to prevent poor surface finish and undersized holes. Cutting and feeding speed depends on depth of bores, the thicker the sheet the lower the speed.
  • Routing – Stationary or hand routers can be used for slotting, beveling, rabbeting, rounding edges and trimming to the PVC boards. Best cutting results are obtained with carbide tipped router bits.
  • Milling – PVC sheets can be milled with milling tool that has allowance to accommodate smoother removal of chips. High forward feed along with moderate cutting speed and deep cuts will lead to good results.
  • Turning – PVC sheets can be worked by turning with a point of turning tool rounded to 0.50 mm radius to avoid linear marks on cutting surfaces. During precision turning, lower cut (2mm) and faster feeding should be used to prevent sheet breakage.
  • Cutting Punching – PVC sheets can be easily cut by shearing up to 3mm thickness. In case any deformity, rougher cut surface or fracturing is noticed, it is primarily because of sheet temperature. PVC sheet, a thermoplastic material, tends to acquire brittleness at lower temperatures. Therefore, pre-heat the sheet material to 95° – 131° F, before shearing. Die cutting by “Steel rule dies” is a common practice. Ideally it is 25mm wide strip steel, thickness 0.35–1mm, with one edge pre-shaped as knife. Bevel may be used depending on cut requirements with one side or both side honing. The bevel should be 5 or 6mm in length.
Yes! I am interested

Watch Video
 
X


Call Us: +91-8079449612
Euro Woods & Timbers Private Limited (Unit Of Straton Group)
Rohit (BDM)
No. 146, Sydenhams Road, Periamet, Opposite Nehru Indoor Stadium, Gate No. 1 , Periyamet,
Chennai - 600003, Tamil Nadu, India
Contact via E-mail
Contact via SMS



Home  |   About Us   |  Product Portfolio  |  Site Map  |   Contact Us   |   Mobile Site

© Euro Woods & Timbers Private Limited (Unit Of Straton Group). All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Euro Woods & Timbers Private Limited (Unit Of Straton Group)